The routine maintenance of the ultrafine pulverizer is the key to ensure its long-term stable operation, improve production efficiency and extend the life of the equipment. Here are some specific routine maintenance measures:
1. Clean regularly
Exterior cleaning: Regularly use a dry cloth or brush to gently wipe the outer surface of the pulverizer to remove accumulated dust and dirt and keep the equipment beautiful and clean.
Internal Cleaning:
Cleaning of the crushing chamber: Regularly clean the crushing chamber, you can use the method of mixing acid and alkali, pour a variety of cleaning liquids into the crushing chamber, and rinse it with water after leaving it for a period of time. Take care to avoid water rushing directly into the electrical part of the appliance when cleaning.
Abrasive parts cleaning: Remove the grinding disc and grinding beads and clean them with a clean cloth or brush to remove attached dust and impurities.
Second, the lubrication system inspection
Oil level check: Regularly check whether the lubricating oil level is sufficient to ensure the normal operation of the lubrication system.
Oil inspection: check whether the quality of lubricating oil meets the requirements, and replace it in time if the oil is found to be deteriorated or contaminated.
Tubing inspection: Check whether the oil pipe is damaged or leaking to ensure the normal supply of lubricating oil.
3. Replacement of wearing parts
Beads and discs: Replace the beads and discs regularly depending on usage. Generally speaking, the service life of the grinding beads is about 500 hours, and the service life of the grinding disc is about 1500 hours.
Bearing: Bearing is an important part of the ultrafine pulverizer, and its service life is about 2 years. Bearings should be regularly inspected for wear and replaced if necessary.
Fourth, electrical system inspection
Regularly inspect the electrical system of the pulverizer, including wires, cables, plugs, etc., to ensure that the electrical connection is firm and undamaged.
Pay attention to the stability of the power supply to avoid damage to the equipment caused by sudden power failure or voltage fluctuations.
5. Other precautions
Pre-start-up inspection: Before each start-up, check whether all parts of the equipment are installed in good condition, and whether the crankshaft, belt, gears and bearings and other parts are operating flexibly.
Observation during operation: During the operation of the equipment, attention should be paid to observe whether the operation of each part is normal, and if there is abnormal sound or vibration, it should be stopped in time for inspection.
Post-shutdown maintenance: After a shutdown, the power should be turned off first, and then cleaning and maintenance work should be carried out. Especially after crushing viscous and corrosive materials, they should be cleaned in time to prevent corrosion.
Safe operation: During use, the safety operation procedures should be strictly adhered to to ensure the safety of personnel and equipment.
Through the implementation of the above daily maintenance measures, the service life of the ultrafine pulverizer can be effectively extended, and the production efficiency and product quality can be improved. At the same time, it also helps to reduce equipment failure and maintenance costs, and create greater economic benefits for enterprises
Related Testimonials
Online Consultation
